Apparecchio per monete e piume,Tubo a caduta libera
Apparecchio per monete e piume is designed to demonstrate free fall in a vacuum. This experiment demonstrates the coin and the feather falling with the same acceleration and striking the tube’s bottom at the same time.
- Descrizione
- Inchiesta
Descrizione
Tubo a caduta libera per apparecchi per monete e piume is designed to demonstrate free fall in a vacuum. This experiment demonstrates the coin and the feather falling with the same acceleration and striking the tube’s bottom at the same time. It shows the fact that objects of different masses fall at the same rate in a vacuum.The Tubo a caduta libera per apparecchi per monete e piume consists of a 90cm long and 5.5 cm in diameter plastic tube that is capped on both ends with a rubber stopper, with one end having a 1/4 NPT ball valve(stopcock) fitting for air evacuation.
When the tube is inverted under normal atmospheric pressure, students will see that the coin falls at a faster rate than the feather because of air resistance. When air in the tube is pumped out via a vacuum pump to create a vacuum in the tube, and the tube is inverted, the coin and feather in the tube will fall at the same rate because there is nothing causing resistance anymore in the tube.
Very occasionally the feather sticks at one and and must be dislodged by shaking the apparatus. A small vacuum pump (0201020060) or Pompa per alto vuoto da laboratorio (0201020590) is required.
Scarica
Parametri tecnici principali
Apparecchio per monete e piume
Main Technical Parameters
Apparecchio per monete e piume | Specifiche |
SKU | 0201011280UN |
Length | 90cm |
Tube ID/OD | 52/55mm |
Shutoff Valve Type | Swing/Ball |
Valve inlet Diameter | 1/4 NPT |
Apparecchio per monete e piume con manometro | Specifiche |
SKU | 0201011280B |
Length | 90cm |
Tube ID/OD | 52/55mm |
Shutoff Valve Type | Swing/Ball |
Valve inlet Diameter | 1/4 NPT |
Foto